An irrigation water pump is a machine used to transfer water from an irrigation canal or stream to a field. Irrigation water pumps work by transferring water from an irrigation canal or stream through a series of pipes and discharge valves into the field.
The pump's impeller or rotor action causes the water to flow down the pipe at a high speed, which in turn forces it through the smaller holes in the discharge valve. This process helps to distribute water evenly across the field, as well as reduce the amount of time it takes for the water to reach its destination.
What are the types of Irrigation Water Pumps?
Farm irrigation water pumps come in a variety of shapes and sizes, but all of them work on the same principle: draw water from a lower reservoir and pump it up to a higher one. There are three types of quality farm irrigation water pumps: rotary, reciprocating, and centrifugal.
Image Source Google
Rotary pumps operate in a circular motion and transfer water by spinning around a central shaft. They are the most popular type of pump because they are relatively easy to operate and can be used on small or large systems.
Reciprocating pumps use pistons to move the water back and forth between the two reservoirs. Centrifugal pumps use rotating blades to create a whirling motion that transfers water. They are less common than rotary or reciprocating pumps, but they are more efficient because they transfer more water per minute.